0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How do I replace rear turn signal bulb on 1998 F-150?
unscrew the 2 screws holding the light in. pull the light out. replace the light.
Where is the diagnostic connector on a Mercedes Benz 1998 Ml320?
Under the steering wheel ,covered with black cover with two screws
How do you replace rear brake lights on a 1998 Ford Ranger?
There are two screws on the outside of the tail light assembly. Remove these two screws (keep them) and the assembly should be able to be removed from the truck. Carefully twist the socket out of the tail light assembly. Pull the old light bulb out of the socket and replace with new. Insert the tail light assembly into position in the truck bed and replace the two screws.
How do you change a fog light bulb on a 98 neon?
First you have to take out the blinker/parking light to get to the fog light, each fog light has 4 screws around it (don't touch the one on the side that's gold) undue the 4 screws and pop it out, then you have the bulb exposed and you can replace it.
How do you replace the headlight bulb located on a 1998 Toyota Tacoma?
If you can't get to the back of the light assy you have to remove it from the vehicle and the bulb screws in.
How do you change rear tail light bulb in 1998 Chevy Blazer?
remove all the screws from the tail light asembly turn bulb to remove put electrical contact greas on new bulb install new bulb replace screws
How do you change a rear parking light lens on 1998 Dodge Dakota?
I believe it is 2 torx screws inside the tailgate holding the assembly. Have to replace the whole assembly.
How do you replace shift gear light 1998 le altima?
how do you replace shift gear light on a 1998 le altima car?
1998 Chevrolet C1500 truck how do you replace the head light lens assembly?
Remove plastic grill.(screws on top,snaps at bottom)Now you can easily see the 4 bolts that attach each light housing.Remove lights, reverse order to replace.
How do you replace 1998 dodge Ram tail light?
lower the tail gate on the truck. there will be 2 torqx head screws removed the screws it will loosen the inside of the tail light assy... pull on the tail light assy strait back. the light assy should come out turn the bulb casing on the back of the light assy and pull the bulb out.
What year was the Mercedes Benz ML320 made?
The Mercedes Benz ML320 has been produced since 1998. The Mercedes Benz ML320 is still in the lineup in 2010 for Mercedes.
How do you replace the brake light bulb on a 1998 Chevy silverado?
when you put the tailgate down there will be two screws to remove the light assembly. then to open the light assembly it requires a 1/4" nut driver I believe? good luck its easy
