You have to remove the timing belt cover,camshaft pulley and timing belt.Itis near the top behind the belt.
Where is the thermostat located and how do you replace it on 1992 toyota camry 4 cylinder ingine
you pay somebody to do it for you...I have one mostly apart in the garage now.
Drain the water from the cooling system of your 1992 Saturn. Remove the water hose. Remove the thermostat housing retaining bolts. Take the thermostat out. Reverse the process to install the new thermostat.
where is the thermostat located in a 1992 cutless supreme automobile
1992 Lexus es300 wear the thermostat is located
How do you replace the ignition swith opn a 1992 Pontiac Bonneville se
To replace a thermostat on a 1992 Geo Storm first locate the its housing. Once found drain the coolant system and remove the housing from the engine. Replace the thermostat.
follow the upper radiator hose from the radiator to the engine this is where youwill find the thermostat housing. remove ther housing and you'll be looking at the thermostat. it is realy easy
To change the thermostat on a 1992 Pontiac Grand Am with a 3.3-liter engine, first, ensure the engine is cool and disconnect the negative battery cable. Drain the coolant from the radiator, then remove the upper radiator hose from the thermostat housing. Unbolt the thermostat housing, replace the old thermostat with a new one (noting the correct orientation), and reassemble by reversing the steps. Finally, refill the coolant, reconnect the battery, and check for leaks.
On the intake manifold near the thermostat housing. It will be two wires a yellow and one black wire.
It is located at the engine end of the upper radiator hose. Take the thermostat housing off. When replacing the thermostat make sure the spring goes toward the engine. It is not the upper radiator hose...it is the lower one..
The thermostat is located on the driver side of the engine just below the cam pulley. (The one with the power steering pump belt.) You just have to follow the top rad hose. P.S. Its hard to get at.