you dont you get a new car
The 3rd brake light can be replaced by removing the subwoofer cover by pushing down and towards the front of the car, other brake lights can be replaced by opening velcro covers on inside of trunk lid.
brakes
how to change front brake pads on a 1994 lexus es300
To change brake light bulbs on a 1998 Lexus ES300, open the trunk lid. Locate the plastic rivet on the side of the trunk liner. Turn the rivet while pushing in with a screwdriver. Remove the rivet and the trunk liner can be pulled away to access the bulb. Push in and turn the bulb to remove. Insert the new bulb the same way. Replace the rivet in the trunk liner.
If you grab the light and pull it straight twards yourself it will come off. The bulb is in there
brake pedal under dash
The minimum thickness for the rear brake rotor on a 1998 Lexus ES300 is typically 10.0 mm. It's important to measure the current thickness of the rotors and replace them if they are below this specification to ensure safe braking performance. Always refer to the vehicle's service manual for the most accurate and specific information.
The fuel filter for a 2000 Lexus ES300 is in the engine compartment on the driver's side right by the firewall under the master cylinder (the container for the brake fluid).
Check brake linings - maybe need replacement
The E-brake switch on a Lexus ES300 is typically located near the center console, often integrated with the parking brake lever. In some models, it may also be found under the dashboard near the brake pedal assembly. For precise location, it's best to consult the vehicle's owner's manual or a service manual specific to your model year.
I have a 1994 Lexus ES300 and when my brake light came on, it meant that one of my brakes lines had busted. Eventually I had NO brakes. Not sure if this would apply to yours. Get it checked out before it is to late.