Want this question answered?
You have to remove the interior trim of the lift gate.
check your clutch and brake fluid
The brake rotor thickness for your 2003 Mitsubishi Eclipse, is 0.75. The rotor should not be used if the thickness is less than this.
DOT 3
The minimum brake rotor thickness for a 2002 Mitsubishi Eclipse is 1.17 inches. When it falls below this thickness, braking performance will suffer and must be replaced.
try google
you smash the car, and eat it
in the fuse box! read your manual! when replacing make sure you replace the fuse with one of equal amperage (amps)
Dot 4 brake fluid
Replace the bulb it works when you turn on the driving lights and when you brake. there are two little springs inside the light one is for the brake light and the other is for the driving light. All you need to do is replace the bulb. good luck.
Jack up the front of your 1991 Mitsubishi Eclipse. Remove the brake pad assembly. Loosen the brake rotor by tapping on it with a hammer or mallet. Slide the brake rotor off. Reverse the process to install the new brake rotor.
Perhaps brake lights? Check the stoplight switch at the upper end of the brake pedal under dash area