You will need to remove the fan and the water pump. You may have to remove the radiator to be able to have room to remove the balancer. Remove the bolt in the center of the crankshaft. Using a puller , pull off the balancer. Remove the bolts surrounding the timing. Pry the timing cover from the block. I do not know your reason for doing this but if you are wanting to remove the seal you DO NOT have to remove the timing cover.
The interior bulbs on a 1999 Chevy Malibu are contained in a plastic fixture whose cover snaps open. Once inside the fixture, pop out the dead bulb and replace it with the appropriate replacement.
You will need to remove the fan shroud and the fan. Drain and remove the radiator. Using a puller you will have to remove the harmonic balancer. Next you will have to remove the water pump. Remove the bolts holding the timing cover and pry it away from the engine. In some cases you will have to remove 2 bolts on either side of the oil pan.
No the timing chain or belt is located inside the cover on the housing of the engine, look for the bottom radiator hose it will lead you to the water pump.
Need to replace the electronic timing controll module. It is mounted over by the left valve cover, But bolted on the intake.
on 1991 ford taurus 3.8 how do you replace a timing cover
remove center bezel and ignition lock cover and remove the 4 screws and unplug connectors and antenna lead in rear of radio
do youi have to drop oil pan to replace timing cover for 89 ford bronco
In order to replace a timing chain for a 2003 Chevy Cavalier, a person will need remove the oil pan, crankshaft pulley and hub, timing cover bolts, and timing cover. Then the timing cover gasket, timing cover and bolts, crankshaft pulley, and oil pan will need to be installed.
The water pump is at the bottom of the engine, bolted on the back side of the timing cover. The pump can be removed without remove the timing cover.
Replace The Timing Cover Gasket
Remove cam gear, remove broken back cover, replace back cover, replace timing belt.
You did not say what size engine but in most cases the PCV valve is in the valve cover.