The interior bulbs on a 1999 Chevy Malibu are contained in a plastic fixture whose cover snaps open. Once inside the fixture, pop out the dead bulb and replace it with the appropriate replacement.
where do you find the replacement bulb for a 2001 Chevy Malibu ls for fog light replace ment on the car
Pull the complete headlight assembly out to get to the bulb.
To replace a light bulb on a Malibu Chevrolet, first, ensure the vehicle is turned off and the keys are removed. Open the hood or access the trunk, depending on which light bulb needs replacing. Remove the bulb cover or housing by twisting or unclipping it, then carefully pull out the old bulb. Insert the new bulb, ensuring it's secure, and reattach the cover or housing before testing the light.
Please, be more specific: WHICH interior (LOCATION) light bulb(s) are you trying to replace?
How many people of (insert race here) do you have assisting?
To change that bulb push the bulb down and turn to take out you may need to unscrew the cover first and replace it with the same bulb
To change the shift lever console light bulb in a 2003 Chevrolet Malibu, first, disconnect the negative battery terminal for safety. Then, remove the trim panel around the shift lever by gently prying it off with a flat tool. Once the panel is removed, locate the light bulb socket, twist it counterclockwise to remove it, and replace the old bulb with a new one. Reassemble the trim panel and reconnect the battery terminal to complete the process.
You will need to take the complete headlight assembly loose or out to get to the bulb to change it.
Replace the bulb.
2009 Chevrolet Malibu headlight bulb replacement: Purchase the correct replacement headlight bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement bulb information. Then consult your owner's manual for the headlight bulb replacement procedure. As simple as it sounds, the owner's manual is the best place to start for bulb replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).
Remove screws, remove light assembly, rotate bulb holder counterclockwise & pull out, replace bulb(# 194). Installation is reverse.....
If it is like mine you have to remove the whole fixture to get to the headlight and park light/turn signal, but it not really that hard I think you just need a 10mm socket and wrench but I might be off on the size of the wrench.