You have to take apart the steering column, remove the steering wheel, remove the ignition switch, and it's a pain in the butt.
turn signal switch is the hazard button! Pull out hazard button and replace it! good luck!
It's in the hazard warning switch. You need to replace the switch.
The 2003 Chevrolet Silverado turn signal switch is located below the dashboard, on the drivers side of the passenger compartment. The turn signal switch simply plugs in and out.
pull the steering wheel
try lmctruck.com
Remove the airbag and steering wheel, remove the torx screws from the steering housing and remove the housing, remove the screws from the signal and wiper switch, and remove the screws above the ignition switch and remove the switch. Replace the switch and replace everything in reverse.Ê
You need to remove the steering wheel. The switch is located below the steering wheel.
The flasher is broken. It is located inside the hazard switch and easy to replace. The switch is about $30 from the dealership and takes 10 minutes to replace.
Replace turn signal switch. Its grounding when you put turn signals on. I had the same problem and replaced it .Solved issues.
i beleave the inertia switch is located behind the glove box or just below it.. that's where it is located on my 86 and my old 88 bronco II
Change the flasher first.
The turn signal switch is quite easy to remove and replace. The turn signal switch simply plugs in and plugs out.