many of the accesories must be removed first, remove the head per repair manual and take the head into a local machine shop that performs head jobs. They will check the head for cracks, pressure test it and insure the head is still flat. If you want to do it yourself, get the gasket kit, buy the valve removal tool, new valves and install them. with out reaming the guides though there is a chance the valve stems will still leak.
Add your answer:
Related Questions
How do you lower a Ford Ranger?
how do i lower a 92 ford ranger
Is there a free online shop manual for a 92 ford ranger?
There are a number of free online shop manuals for a 92 Ford Ranger. The Ford Ranger online store is your best bet on finding the manual.?æ
Can I replace the manual transmission in my 93 Ford Ranger 4X4 4.0L with the one out of a 92 Ford Ranger 4X4 4.0L?
Possible, if you switch tailhousings. the transfer case takes a different tailhousing then a 4X2
Will a 97 2.3 Ford Ranger transmission fit a 92 2.3 Ford Ranger?
what are the years and kinds of Automatic transmissions that will fit in a 2.3l 97 ford ranger 4x2
Where is turn signal flasher on 1992 Ford Ranger?
I have a 92 Ford Ranger also and mine is located on the top of the steering wheel.
How can you stop your 92 ford ranger 2.3 from valve rattle?
It's a ford thing just get use to it.
Need vacuum diagram for 92 Ford Ranger automatic?
try autozone.com
What is the spark plug gap for a 92 ford ranger 4.0?
.054 inch
How do you replace the EGR valve on a 1992 Ford Ranger?
I believe that a 92' ford ranger doesn't have a erg valve, they just started installing them in 93' models.please correct me if I'm wrong... According to Auto Zone and the owners manual it does. Auto Zone has one in stock for $76.00
Where is the thermostat on a 92 Ford Ranger?
follow the top rad hose from the rad to the motor and there it is.
92 ford ranger has no spark new module crank sensor?
its junk! crush it!
What year Ford Ranger door will fit your 1992 Ford Ranger 4 cylinder.?
The Ford Ranger body style didn't change from '83 to '92. They changed just about everything else, though. Make sure you know what you're looking for.
What causes your 92 Ford Ranger to get stuck in 4th gear?
a 92 Ford Ranger stuck in 4th gear can be caused by several things. Low fluid, stopped filter, broken vacuum line or a stuck transmission valve can all be the cause.
Can you put a 15 inch tire on a 92 ford ranger?
Yes you can put it on the hood or on the tailgate.
How do you set timing on a 92 ford ranger 2.3L distributor less ignition system?
get a mechanic
What are the torque specs for a 1992 Ford Ranger flywheel 3.0 V6 for the head intake rockers exhaust to head and valve covers?
what are the torque specs for the flywheel on a 92 ford ranger?
92 Ford Ranger starts up for a second then dies?
Check for proper fuel pressure & spark
For a 1992 ranger what other years can I use to replace the hood fenders and doors?
1989 thru 92
Spark plug gap fora a 92' Ford Ranger?
For the 1992 Ford Ranger : 2.3 L / 2.9 L / 3.0 L - ( .044 inch ) 4.0 L - ( .054 inch )
What gear oil for a 92 Ford Ranger Manual Transmission?
It is important to have the right fluid in a car to help it run smoothly. For a 1992 Ford Ranger with a Manual Transmission the best gear oil is Mercon V.
How do you remove a 92 ranger oil pan?
The oil pan on a 92 Ford Ranger is removed by taking out by placing a drain pan under the engine, removing the retaining bolts, and prying the pan loose. It can then be lowed from the engine and removed.
Where is the washer fluid pump at on a 1992 ford ranger 4.0 truck?
I have a 92 Ranger, I found my washer fluid pump directly under the washer fluid reservoir.
What does a 97 ford ranger fuse box diagram look like?
Click on the link below Click on Owner Guides The Owner Guide ( which includes the fuse box diagram ) can be viewed online
How do you replace sliding window in 92 ford conversion van?
How do you replace sliding driver side rear window in 99 ford e 150 conversion van
How do you Replace battery cables 92 ford ranger?
Remove cables from battery Remove + cable from the starter solenoid Remove the - battery cable from engine ground install new cables using the same routings as original
