Remove radiator, serpentine belt, bracket for Power Steering, and you should be able to get to all water pump bolts, although I'm having a hard time removing fan from pump.
cant turn the key ignition on my 1996 aerostar ford
The 1996 ford Aerostar has a curb weight of 3,487 lbs. The gvwr of the Aerostar van is 5,300 lbs.
What type of rear end do you have?
Bank 1 is the passenger side of your engine in a 1996 Ford Aerostar
According to the 1996 Ford Aerostar Owner Guide : ( 21.0 U.S. gallons )
How do you open sliding door on a 1996 Ford Aerostar Van that will not disengage?
A ( 1996 ) Ford Aerostar has a ( 21.0 U.S. gallon / 79.5 litre gas tank )
According to the 1996 Ford Aerostar Owner Guide : ( 21.0 U.S. gallons / 79 litres )
According to the 1996 Ford Aerostar Owner Guide : ( 5W-30 ) is the preferred oil
The 1996 Aerostar did not come with a 3.8 V6. It is a 3.0 or 4.0 http://autorepair.about.com/library/firing_orders/bl-ford-firing-96.htm
Same key as ignition...
The CV joints on a 1996 Ford Aerostar can be replaced by removing the nuts and bolts on the tires. Next, cotter pins, lower ball joints, and the outer joint will need to be removed. Then a pry bar can be placed between the transmission and the inner joint, which will make it easy to pull out.
No , both the 3.0 and 4.0 liter Over Head Valve ( OHV ) engines used in a 1996 Ford Aerostar use ( 1 ) timing CHAIN
If your Ford Aerostar is overheating and losing water, it may be a bad radiator. You need to take your car in to get serviced.
What exactly do you want to know about "Air conditioning clutch on a 94 ford aerostar van?" How to replace? What engine do you have, etc.?
Ford Aerostar was created in 1986.
Look at the lower rear end of the engine
Electric or manual?
On a 1996 Ford Aerostar : The fuse box is under the instrument panel , on the drivers side
Under the instrument panel on the driver side
Autozone worked very well for me on my 91' Aerostar 3.0 .
10 Lb-Ft or 14 Nm. Source: 1996 Aerostar, Ranger, Explorer Workshop Manual from Ford