Chevy Cavalier

How do you replace the water pump on a 1997 Chevy Cavalier 4 cylinder?

12

Top Answer
User Avatar
Wiki User
2009-06-11 22:01:37
2009-06-11 22:01:37

Caution:On models with a Delco Loc 2 or Theftlock audio system be sure the lockout feature is turned off before proceeding * Disconnect the negative battery cable * Drain the cooling system * Remove the cooling fan then remove the serpentine drivebelt 2.2L OHV Engine * Remove the water pump pulley from the front of the water pump * Remove the coolant reservoir hoses * Detach the water pump retaining bolts and remove the pump from the vehicle 2.3L And 2.4L OHC Engines * Disconnect the oxygen sensor harness connector * Raise the vehicle and support it securely on jackstands * Remove the exhaust manifold brace and loosen the exhaust manifold bolts * Remove the radiator outlet pipe assembly to the water pump housing bolts and separate the assembly from the engine * Remove the exhaust manifold pipe from the exhaust manifold * Remove the radiator outlet pipe from the oil pan.On manual transaxles cars remove the exhaust manifold brace and keep the radiator inlet hose attached to the assembly.Pull down on the radiator outlet pipe in order to disengage the pipe from the water pump while leaving the radiator outlet pipe hanging * Lower the car remove the brake booster vacuum hose from the camshaft housing also remove the exhaust manifold from the cylinder head * Remove the timing chain cover from the engine * Remove the timing chain tensioner * Remove the water pump cover bolts from the engine block and the timing chain housing * Remove the water pump bolts and separate the assembly from the housing

1
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions

User Avatar

What is the cost to replace a watrr pump on a 97chevy cavalier

User Avatar

How do you replace timing chain & water pump on a2001 Chevrolet cavalier

User Avatar

Remove the water supply hose from your 1988 Chevy Cavalier thermostat housing. Remove the thermostat housing bolts. Lift the old thermostat out and drop in the new thermostat.

User Avatar

Drain the water from your 1989 Chevy Cavalier cooling system. Remove the water return hose from the water pump. Remove the water pump belt. Remove the water pump retaining bolts. Reverse the process to install the new water pump.

User Avatar

What do I need to do if my 1999 chevy cavailer has water in the oil?

User Avatar

Remove the water supply hose from the top of your 2005 Chevy Cavalier thermostat housing. Remove the thermostat housing retaining bolts. Lift the old thermostat out and drop in the new thermostat.

User Avatar

If you have a 2.2 liter 4 cylinder, the water pump is under the alternator on the passenger side and below the serpentine belt tensioner.

User Avatar

Which engine does your 1982 Chevy Celebrity have? Is it the 2.5L 4 cylinder or the 2.8L V6? They are very different.

User Avatar

You need to spend $15 and purchase a repair manual, at most auto parts stores.

User Avatar

The water pump on a 97 Chevy Malibu 4 cylinder is replaced by removing the engine accessories, drive belt, and radiator hoses. The pump can then be unbolted, removed, and a new pump installed.

User Avatar

Replace water pump for an 1986 Chevy Nova?

User Avatar

why does my 2002 chevy cavalier over heat after i change the thermostat and the water pump

User Avatar

Where is the Water Pump located and how do you replace it on a 1990 Chevy Corsica?

User Avatar

It is behind the timing belt cover and is driven by the timing belt. There are various arrangements according to which engine is fitted.

User Avatar

To replace the thermostat on a 91 Cavalier you need to drain the radiator. Remove the top radiator hose and water inlet. Remove the thermostat from under the inlet. Install the new thermostat and reinstall the inlet and hose. Fill the radiator with fresh antifreeze.

User Avatar

do not have a clue!!!!good luck though. i need the same answer only for a 1999 metro:(

User Avatar

the water pump is in with the timing chain, and is very hard to get to. If you will look under your exuast manifold you will see it to change it you have to your manifold off,altinator,belts, balancer,exc just have someone do it

User Avatar

how to replace water pump in 93 ford econoline 6 cylinder ford van

User Avatar

Drain the radiator. Remove the pump belt. Remove the fan and shroud if needed. unbolt the pump and replace it with the new one. Reinstall the fan, shroud, and belt. Fill the radiator with coolant.


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.