Want this question answered?
I need instructions on how to change the window motor in 1995 Chevy Camaro.
You can replace your 1995 Chevy Corsica motor mount by loosening the motor mount retaining bolt. Jack the engine up approximately 3 inches. Remove the motor mount retaining bolt and the motor mount bushing. Put the new motor mount bushing in and reverse the process.
you must determine weather the switch or window motor is bad and replace.
not easy pass to a qualified window and door expert
Where is the idle speed motor located at on a 1995 chevy blazer?
You dont. You just have to remove the glove box insert.
9 outta 10 times it will be a bad power window motor. I rarely see the window switch go bad.
You need a 3/8 drill bit to drill-out the rivets and then replace the motor that way. It might be easier to replace the whole regulator.
how to change the fan belt on a 1995 Chevy blazer vortec motor?
The blower motor can be replaced on a 1995 Chevy truck by first disconnecting the battery. It helps to take a picture of the blower motor before dismantling, so that it can be put back easily. Disconnect all the wires from the motor, then remove the bolts holding it to the firewall. Replace with the new motor and bolt it in, then connect the wires. Reconnect the battery.
== ==
The 1995 Cadillac Eldorado drivers side door panel is held in place by eight retaining clips. Pry outward on each retaining clip. The door panel will come off. Remove the linkage from the power window motor. Remove the wiring harness from the power window motor. Remove the retaining bolts. Reverse the process to install the new power window motor.