Want this question answered?
The thermostat housing on a Chrysler 302.7 L engine can be removed by loosening the 3 housing bolts. Remove the water hose and the housing will come off. Reverse the process to replace with a new housing.
The thermostat in the Chrysler 300 is located beneath the alternator and oil tube, right under where the radiator hose hooks to the engine. To change it out, remove the three bolts from the housing on the old unit. Remove it, replace it with a new one and tighten the three bolts.
Yes.
To replace the thermostat on a Chrysler Pacifica, first locate the thermostat housing just behind the alternator. Remove the two bolts holding this on, then remove the old thermostat. Replace with a new thermostat and thermostat gasket. The put the bolts back in and tighten down. Make sure to check the antifreeze levels after this project.
To replace a thermostat on a 2005 Chrysler Sebring first drain the coolant from the vehicles radiator, the engine must be shut off during this repair. Then follow the main radiator line to the thermostat housing. Remove the housing and replace the thermostat inside. Refill the coolant.
Will most likely have to consult a Chrysler dealer.
Spring side goes into the block.
Broken thermostat. Common Chrysler problem. Replace the thermostat.
The thermostat on the Pentastar 3.6L V6 is under the housing that the upper radiator hose hooks to on the engine.
Replace the fuse.
$300.00
It is under the housing where the lower radiator hose attaches to the engine.