the screws come off and you replace it
To replace the rear brake lights on a Nissan Primera first open the trunk lid. Locate the tail lights and find the plastic cover which hide the bulbs. Remove the cover and then the bulb. Replace with a new bulb.
To replace the brake light bulbs on a VW Polo, pull away the carpeting in the trunk, unscrew the bolt holding the lights on, and disconnect the wiring. Replace the bulbs, put the wiring and bolts back, then replace the carpeting.
To replace the taillights on a 2001 Nissan front first prop the hatch open. Locate the rear lights plastic housing and remove them to find the bulbs. Replace the bulbs.
you probally need to replace the bulbs
You have to unbolt the entire tail lamp assembly to change the bulbs. Unbolt the tail lamps from inside the corners of the bed, replace the light bulbs, bolt the tail lamps back in place.
AnswerThe bulbs for the brake lights are usually separate from the normal tail light bulbs. Check and replace the brake bulbs first, and if they are still not working examine the fuses, switch and wiring.
Remove the tail light housing and replace the bulbs.
There is a campaign on the brake bulbs for 2000-2003......If it hasn't been done you should get it done. The bulbs and sockets will be replaced.
The light assy has to be removed and the bulbs removed from the back.
Open the trunk....inside the trunk, on the back side are plastic covers that you can remove...there you will find your bulbs....find the brake light bulbs and remove them and replace them with new bulbs, then replace the covers. Don't forget about the 3rd brake light ...check it to see if new bulbs are needle. Also, if all of your brake lights aren't working...all at the same time...you might want to check your fuses. If replacing the bulbs and checking the fuses doesn't do the trick, the next step is to check the brake light switch above the brake pedal. And lastly...depending on the age of the car, and the last time you replaced your bulbs...you might want to check all those bulbs
check fuses under dash panel and for short if wired for trailer
Fuse, brake switch, bulbs. Replace whatever the problem is. There is no way to know without being hands on. Bulbs most likely answer.
check light bulbs and fuses. light bulbs have 2 elements in them, one for stop and one for running. if thses are ok, replace brake light switch on brake pedal
on some cars the tail lights and brake lights are totally different bulbs gain access to the bulbs and have someone push the brakes so that you can determine which bulbs are the brake lights and replace the tail lights
Remove the taillight assembly to gain access to the bulbs
To replace the brake light on a 2000 Pontiac Montana open the trunk to reveal the housing units. Find the lights and pull the bulbs out. Replace the units.
To change the light bulb on a Nissan Micra first lift the hood of the car. Find the headlight housings the pull the light bulbs from the ballast. Replace the bulbs.
The 2007 Nissan Versa brake light lamp number is 7528. See sources and related links below for pictures and more bulb information.
To replace the headlight bulb in a 1994 Nissan Sentra first prop the hood of the car. Locate the headlights and remove the bulbs from the housing. Install the new bulbs.
Try the fuse and then the bulbs.
The brake lights are located in the trunk of a 1997 Acura Integra. To replace them open the trunk and find the plastic housing. Remove and replace the bulbs.
replace the relay under the hood Also check brake lights switch had the same problem switched bulbs and worked fine
The entire bottom panel (5 bolts) has to be removed in order to replace the light.
Check the fuse, bulbs or there is a push button switch above the brake pedal that may need align or replace
The light assy has to be removed to take the bulbs out.