If it is a rear turn signal you should be able to reach it from the trunk. You may need to pull down the carpet a little in order to see it. It should just unscrew and then just pull out. If it is a front turn signal bulb you should be able to reach it from under the hood, right back behind the casing. and it should come out the same way. Then just take it to a car parts store or even a Walmart and you should be able to get a new one. Most of the time you don't even need any tools. I hope this helps good luck!!
The 1990 Grand Am was a popular car. The curb weight of the 1990 Pontiac Grand Am was 2,739 pounds.
I am not an expert on the 1990 Grand Prix but on a GM product I would look for a round flasher assembly located near the fusebox downunder on the left side of the dash.
The PCV valve is located under the MAP sensor on a 1990 Pontiac Grand Prix. The MAP sensor is in the upper plenum.
You don't
yes it should bolt right up as well as the original motor and tranny
Go to autozone.com. Sign up for free membership. This will give you access to repair guides that includes instructions on how to replace a starter.
follow the top radiator hose to the engine.
replace your turn signal bulbs because one of them has died or is about to.
open the glove box and look to the right
This information should be on the fan shroud.
Did they replace the MAP sensor? If not, good chance there's your problem.
Mrkhh. I stand corrected. The firing order is indeed 1,2,3,4,5,6Answer.