no its not
There aren't headlight covers, it all one unit. One of my lens was cracked and I had to replace the whole unit.
It is in the valve cover.
The 2001 Mitsubishi Montero Sport 3.0 liter engine valve cover torque specification is 40 pounds. You do not want to over torque the valve cover bolts, as you may ruin the valve cover gasket.
first of all you have to consider several things. 1. what is the mileage? if you have high miles you will want to change the valve cover gaskets. The reason is you will need to remove the plenum to get to the plugs and you will want to do this right the first time. 2. change your plugs while you are in there. This is very easy to do. It looks intimidating but invest the time and you be surprised how easy it is. I just did the timing belt, guide, tensioner, hydraulic tensioner, water pump, valve cover gaskets, plugs and plug wires and fuel filter and my montero runs like new with 140,000 miles.
The cost to replace valve cover gaskets on a 2001 Subaru Legacy is about $600. If the work is done at home the cost is only $100 to $200.
I'm going to replace the valve cover gaskets on my 5.4. The top bolts their very loose, but hesitant to come out. any thing would help me
right front valve cover open the hood and on the drivers side valve cover in the front you will see it
how do you replace the valve cover gasket on a 2002 mitubishi lancer
The fuse box diagram for a 1986 Mitsubishi Montero is found through a factory service manual. The underneath cover of the fuse box also has each individual fuse labeled as per their function.
cadillac catera replace valve cover gasket 1997
remove motor mount "dog bones" and also label/remove spark plug wires from spark plugs, remove valve cover, clean cover from debris, use light coat of oil to stick gasket, replace round rubber gaskets, replace cover, wires and "dog bones"
Do you still need some assistance?
You need to replace the valve cover gaskets.
Take to a qualified BMW mechanic.
To replace the valve cover gaskets on a 2003 Jeep Liberty, the valve cover is removed. The old gasket is then removed from both the valve cover and the manifold (old gasket will come off in pieces on both sides). Then spread the sealant on the manifold, place the new gasket on, then put sealant on top of the gasket and replace the valve cover and bolt down.
either tighten the valve cover bolts, or replace the gaskets.
replace valve cover gaskets & spark plug tube seals
autozone.com has detailed instructions on replacing the gaskets.
your self its easy
The Montero Sport's tailgate dome light doubles as the switch. The entire clear plastic cover slides left to right and has three positions. ON-DOOR-OFF
They don't go bad. Either it maintains vac or it does not. If not, just replace gaskets.
If the valve cover gaskets are leaking, yes.
Replacing spark plugs is pretty simple. Disconnect the battery, remove the cover and cables, remove the old spark plugs, put in the new spark plugs, put the cover and wires back on the spark plugs, and reconnect the battery.