Want this question answered?
Replacing the gaskets is a simple process. Getting to the one on the drivers side is the problem. I have not been able to find anything on the internet expaining the process.
how do you replace the valve cover gasket on a 2002 mitubishi lancer
The valve cover gasket, on a 2004 Jeep liberty, can be found by removing the valve cover. Peel the gasket off of the head and replace with a new gasket.
The valve cover ask it, on a S 40 Volvo, can be replaced by first removing the valve cover. Remove the old gasket and replace with a new gasket.
No
you mean a valve cover gasket i think
On a 1987 Nissan Hardbody Pickup, the PCV valve is located between the alternator and the oil filter. The valve can be seen when the oil filter has been removed.
where is the pcv valve located 1994 nissan pick up 4wd 2.4l
More than likely you have a valve cover leak. You probably need to replace the gasket(s).
1995 nissan pickup has a expansion valve rather than a orfice tube and is located on the evap.
Tighten each one uniformly just until they stop, any further and you squeeze out the gasket, any less and it leaks.
you should only change the gasket if you have to take the valve cover off....... you should only change the gasket if you have to take the valve cover off.......