Want this question answered?
Well depends on which wire you are trying to replace? The hot wire that goes from the alt to the battery? Or the wiring harness?
With great difficulty!
you need to buy the wire harness for the car itself then you need to connect it to the stock wire harness, after that, you need to go ahead and strip it and wire it to your new CD players harness and then you will need to screw in and install the new head unit.-Shocker
goto Best Buy and buy a wire harness and an install face plate. Next just match the colors on the wire harness with the new deck, and plug the wire harness into the one the old deck was on. Its too easy.
Only if you change the wire harness, computer and transmission. All are different
Slide under bumper, you'll see the wire harness, disconnect wire harness / bulb housing from the signal glass housing with a 1/4 counter clockwise turn, replace bulb ( 3157 i believe ) re-install
when you buy the harness to wire in, the intructions for correct wiring will be on the harness packaging
replace alternator Saab 2000 4 cylinder 9-5
Remove upper door trim panel using tool J38778 to pry out the retainer at the top. Lift the upper door trim panel in order to remove. Disconnect the wire harness from the tweeter. Remove the insulator (triangle shaped piece) Remove the door trim panel to gain access to the power mirror wire harness Disconnect wire harness electrical connector Disconnect wire harness from retainer clips Remove wire harness fasteners Remove mirror from door Pull wire harness through hole in the door Source Service Manual 2002 Buick Page 8-977
the harness
mazda 323 wire harness color codes
The 1996 Toyota Camry ignition harness has three wires. The red wire is the hot wire. The black wire is the ground wire. The white wire is the auxiliary wire.