0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
MY electric transfer case motor works with a hot and ground wire but doesnt do anything when you plug it back up I have got new 4wd switch on dash What else do I need to check?
the transfer case control module
Where is the airbag control module located on a Kia Optima?
in the center console. You must replace it with the oner that comes out or the ECM will have to be reprogram to accept a new one
What transfer case would be have in a 1996 Jeep Cherokee Country?
New process 231 transfer case
Do you have to program a new transfer case control module on a 1999 suburban?
I had a transfer switch mode switch fault on My 1999 suburban and it would not shift out of 2 wd. I put an new switch in and it did not help. I purchased a new transfer case control module from the dealer for $230. The guy behind the counter did not think I needed to have it programed but suggested I ask the service manager. The service manager told me that it would not work until I spent the $100 to have them program it in the car. I put it in and went trough the 5 times ignition off and on and pull and replace the fuse sequence to wake up the module. It started up and is working perfectly. I am glad I tried it without going back to the dealer.
What transfer case is in a 1978 Ford F-250?
It is most likely a New Process 205 transfer case.
What parts are needed to switch to 4x4 from 4x2?
a transfer case So Far I have The new transmission and the transfer case.
Why would my transfer case hum when engaged in four wheel drive?
chances are there is something loose in the transfer case. If you check and find out that is true then you may need to get a new transfer case.
What does code p0513 means for jeep Cherokee Laredo 2005?
Basically it means it means you have a invalid skim key and you are going to have to replace the i mobilizer module with new keys and reprogram.
Can not get1988 grand wagoneer out of 4 wheel drive?
may need new transfer case or transfer case controller
How do i deactivate or change the factory setting on the keypad for a 1999 ford explorer?
I'm not a mechanic / technician , but the only way I can think of changing the FACTORY keypad code would be to change the RAP module and then reprogram your remotes to operate the new RAP module
How do you replace a Transfer Case Control Module for a 2000 Chevy Blazer?
on your 2000 Blazer the control module is located under the kick panel on the passenger side. Simply remove the plastic panel, unbolt the module with a 10 MM socket and disconnect the wiring hareness. While your there, check the wiring hareness for corrosion as this is a big problem. apply Dielectric grease to the hareness and install new control module.
Best 4X4 with a transfer case?
While the best is subjective, a quality 4x4 with a transfer case is the 73 to 87 series of Chevrolet trucks. The dependable New Process 205 transfer case is designed to withstand high toque and horsepower.
