With the key switched to the "On" position, but the engine off, press the mileage indicator till total miles are shown (ie. Not on trip A or B), and then press and hold that same button. You will see a bars go up as it resets, once it's done, you're good to go.
How do i reset a service engine light on a 2005 gmc c6500 cat engine
it simply means it's time for an oil change.
t's not a problem, it is merely a reminder light so customers will be prompted to do the required maintenance. Turn the ignition ON Make sure the "ODO" is displayed, not "TRIP" Press and hold the TRIP reset button Turn the key off and back on Hold the reset button until the lines on the ODO display disappear and the ODOMETER reading comes back. answered by Liselle
i dont know how
Usually your oil needs changing. You have to reset the light yourself. Look in manual it will show how to reset it.
Two reset the maintenance required light on a 2005 Honda Accord all you have to do is hold the odometer reset button on the gage panel for about 30 seconds while the key is in the on position. Not running just in the on position. it will reset.
Press and hold the odometer reset button while at the same time turning the ignition switch to on. Do not start the engine. After around 5 seconds the maintenance required light will go out.
With the ignition switch in the off position, hold in the hold in the trip odometer. Now turn on your key and you will see a series of zeros begin to appear. Once that stops, your maintenance light will be reset.
Press and hold the odometer reset button while turing the ignition switch on without starting the engine. After 5 seconds the light will go out.
With the ignition key off, push and hold the odometer reset button. Now turn the ignition to the on position but do not start the engine. After about 5 seconds the Maintenance Required light will reset.
The way you reset the low pressure light on a scion tc 05' is: Open the glove department and at the top left of the glove department there is a button and first make sure your car is on and in park with your foot on the brake and once you have done that then hold the button until you see the pressure light go away.
same as a 2005 odometer OS on turn key off hold reset turn key on loght flashes then turn off