answersLogoWhite

0


Best Answer

Opening Instructions: I. Slide the lever (located above the dials on the front of the lid) down to open the lid.

II. Lift the lid from the security lock box to place or remove the keys inside the vault. Resetting Combination Instructions: 1. Your NuSet Security Lock Box is factory preset to 0-0-0. 2. Open lid using the "Opening Instructions" Step I & II from above. 3. Lift the lid from the security lock box. 4. Make certain the lever remains up in the closed position with the last combination set. 5. Insert the "Reset Key" (included) all the way into the side of the lid and make a 1/4 turn. 6. Once the key has been turned, roll the dials one at a time until the desired combination is aligned. Tip : Write down the new combination to prevent loss of the new combination. 7. After the new combination resetted, return the key to upward position and remove it from the lid. 8. Very Important! Check combination before placing the lid to the lock box body. Return the lever to closed/up position. If the lock retracts, the combination has been successfully changed. Please visit NusetLock.com or call toll-free 800-60-NUSET for details.

User Avatar

Wiki User

14y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you reset a 3 digit nu-set lockbox combo?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you reset code for 4 digit bicycle combo locks og?

Lost code for bicycle lock how do i reset 4 digit bicycle combo locks og


How do you reset a 3 digit vaultz lockbox?

First, enter the old code. Then, slide the button towards the hinge (to the left) and enter the new code. Release the button, and you are good to go


How do you take shackle off nu-set 3 letter lockbox?

For 2020 series model, the key lock for the shackle is located inside the vault. Unlock the lock box lid with last combination preset and use the "Reset Key" provided to release the shackle. For 2040 series model, the combo lock for the shackle is located on the top of the lock box. Unlock the lock box lid with last combination preset and press the "Release Button" provided to release the shackle. Visit http://www.nusetlock.com or call toll-free 800-60-NUSET for details.


How do you reset the service indicator on a 07 combo van?

how do you reset the service indicator on a 07 vauxhall combo van


How do you reset the inspection light on combo van?

a special reset tool is needed


Now that you get the lock open how do you reset the combo to lock it again?

you dont


How do you reset a The Club padlock if you forgot the combination?

you cant you need to know the combo and have the lock open to access the combination change device if there was a way to reset a combo on a locked lock what kind of security would that be?


Reset Sphero lock combination?

Sphero locks cannot be reset - only resettable locks can be reset. The Sphero locks come with a permanent combo.


How do you reset a club luggage lock?

On the right side of it, there should be a little silver reset looking button, hold it down while setting it to the combo that you want. Let go and it should only unlock at that combo.


How do you reset pelilock?

to reset it you need to turn it so that the hook is facing the opposite of the direction it faces when you lock it then put in the combo you wish to use. it should pull straight up and keep your combo in until you have it in the locking position. once in locking position, mess up the numbers so that it doesnt have your combo in it. redo the combo you chose to see if it worked. make sure you are putting the combo in where the line is.


How do you reset the computer on 2003 ford expedition after engine swap?

If you mean for fuel mix etc comp will reset and relearn after a long enough battery disconnect. As long as engine trans combo matches computer you are fine. If you did a swap, you don't reset it, you get an ECU that matches your combo


How do you reset service light vauxhall combo?

04 combo 1.7d. Hold mileage reset button and turn ignition to second setting (dash lights on), keep mileage button pressed for about 5 seconds until --- goes away, the service millage should reset.