if its computer orientated i would disconect the battery for 20 minutes
Drivers side you neec to remove the battery, meaning reset radio/clock etc after. Passenger side should be accessible. Cheers, J.
turn your key on leave 4 30 min should reset then change your crt fuse i just had da same proplem
No, but you can reset by disconnecting the battery for a little while to reset its memory and leaned values. Or it will relearn itself while you drive it.
Oldsmobile vehicles do not have inertia/reset switches.
You do not have to reset the computer after this repair. If the Check Engine Light is on it is not because you made this repair. If you disconnected the battery the computer will reset itself.
Reset a fuel gauge? There is not reset for a fuel gauge.
press reset for tripmeter for a few seconds
There is no reset for the fuel gauge. The sending unit in the fuel tank has probably failed.
The oil gauge does not have a reset. Is malfunctioning, the sending unit has probably failed.
It will automatically reset when fuel is added to the tank.
Simultaneously press the "E/M" and "MODE" buttons and hold for three seconds. This will reset the MPG average gauge.
Happens to every one of these cars...question answered here http://wiki.answers.com/Q/What_is_the_easiest_way_to_reset_the_needles_on_the_fuel_and_temperature_gauges_on_a_1997_Buick_Park_Avenue
There is no reset button for the fuel gauge. Something is either wrong with the gauge or the sending unit in the tank.
Hold reset button for about 5 seconds then it should reset.
get it reset at autozone for like 5 bucks
push the break pedal 3 times to reset the computer
reset the average mpg reading