Remove battery cable for one minute .
how to reset abs warning light on 2000 gmc Yukon
Repair the problem and it will reset.
After correcting the cause of the fault the vehicle must be driven above 40kph to reset the ABS warning light.
The abs light is on because there is a problem with the abs system. The light will remain on until the problem is fixed. Once the problem is fixed the light will reset itself after a short drive.
By fixing the problem which is causing the light.
If the correct repair was done it should reset itself after a short drive.
The abs light is on because there is a problem with the abs system. Until the problem is fixed the light will remain on. Once the problem is fixed the light will reset itself after a short drive.
Take it to the stealership and get your brakes checked
Your problem is not the warning light. The light is on because there is a problem with the Anti-Lock Brake System (ABS). Have it repaired and they will reset the light.
i would go to your local reanault dealer
You have to repair the malfunction that caused the code stored in the abs computer.You have to repair the malfunction that caused the code stored in the abs computer.
You need to have the abs codes read, repair the cause, and the light will turn itself off.