Look on the bottom there should be a reset button. It is very small and you have to use a pen point or paperclip to push it in. Set it to the numbers you want and then remove your pen/paperclip.
http://www.safeskieslocks.com/support.html
A TSA 003 is a combination lock. To reset it, the shackle must be spun for 180 degrees after the current code has been entered. It is now in the reset position.
To change the combination on a TSA lock, you will need to locate the reset button on the lock. Press and hold the reset button while setting your desired combination. Release the reset button and test the new combination to ensure it is working properly.
All the TSA locks have a key that is used only by the TSA to open the lock.
The specialty of using TSA locks is that a consumer can pick her or her combination for their lock, as opposed to having the manufacturer set the lock combination.
To reset or put in a custom code for your TSA suitcase lock follow these instructions. Set the lock to the default code of 000; use a sharp item to press the reset button in do this until you hear a click. Set your own custom code, pull the catch out as if to open the suitcase lock until you hear another click, your custom lock combination is now set.
Reset instructions for Samsonite TSA approved luggage lock (TSA002) Step 1. Use the default lock code 000 to unlock. Step 2. Turn the locking loop 90 degrees left with the dial numbers facing you. Step 3. Push and hold the locking loop down. Step 4. While holding the locking loop down against the internal spring reset the 3 digit code. Step 5. Release the locking loop. Step 6. Don't forget the new lock code. Step 7. Set locking loop into locked position and change the three digit numbers. Step 8. Lock should be locked. Step 9. Unlock- enter you new three digit code to unlock. L.G. Wall
you dont unless you want to do something illegal
TSA luggage locks are just like regular luggage locks but with a Liberty Torch symbol on them. They will also have a TSA code on it. This indicates that airport security is able to use their keys on those locks to quickly check the contents.
I have the same problem. throw it away
Forget the clamp and TSA key. Look at the bottom where there is a small silver button. With a pen or small item, press this in with the correct code entered. (default for mine was 000). With the button pressed move the code to what you would like it to be set to like 123 and release the button. Now try the clamp with 123 and it should work. Save