hold the trip reset button in for a while and your clock will move, i had the same problem
Between the Tachometer and Speedometer above the steering column there are 2 buttons, S/R and clock. Press the clock button and hold until the display in the dash flashes, press the SR button to set hour, then press clock once to switch to minutes, press SR to set minutes then press clock to complete.
Yamaha r1 will beat anything off the line
A yamaha TTR250 has 28HP @ 8,500 RPM
1974 yamaha dt 125
Usually, if i remember correctly, there are 3 buttons. One with an H, one with an M and one with a R. The H is Hour, the M is Minute, and the R is Reset. So you can use the buttons to change the time in the truck.
set reset flip flop
The Operator's Manual reads: First access the time/date submenu through the settings menu. Use the +/- to the Time/Date submenu. Use the arrow keys until you can see the message "Clock, hours, confirm by press. R" appears. Press + or - to set the hour, use the arrow keys to move to the minutes.... The manual also says "Press the reset button in the instrument cluster to confirm, the hour is set and stored." WHEN you have the clock set to hour you want - you need to momentarily (1 sec or less) press the RESET button just to the left of the instrument panel and THEN your analog clock will reset itself. The hands move by themselves to the time you have set. You MUST touch the reset button at the end of setting the digital clock (while you're still on the same screen). I just did this on my 2006 CLK 350 and it worked!
Rigor, giro, gory, gyro, joy, rig, jog, jig, or
If it is a digital clock there are three buttons to the right of the display use the end of a pen and push in the H hours M minutes or R reset you need to hold it in for a few seconds, quite a few.
Type you How do you reset Myspace back in English?r answer here...
The letter "R" is engraved inside of the Grandfather Clock!