Autozone will use the Engine Diagnostic Code Reader to read the codes and then ERASE/RESET the engine light. { Phone other autoparts stores to see if they provide similar service).
= How do you reset the Airbag light on a 2001 Nissan Maxima SE ? =
A quick way to reset the check engine light would be to disconnect the battery for a short while
The only way to reset the service engine light on a Nissan without going to a mechanic is to remove the battery cables and touch them together. This will reset the system but it will not turn it off forever; it will come back on until you fix the problem.
After reading the code, fixing the cause, you clear the code with a scan tool.
Go to autozone
It will automatically reset itself after you have started the car 50 times after the problem was fixed, or sometimes if you disconnect the battery for a while it will reset itself.
Unplug the tire pressure light cable.
How does one reset service engine light on 2000 Nissan Quest Thanks Bill
No reset button. Easiest way is to disconnect the negative battery cable for a couple of minutes, then reconnect. This will erase any codes stored in the computer. If everything is okay, the check engine light will stay off.
how to reset engine check light on 2009 murano
Go to auto zone and have the codes read for free. DISCONNECT THE BATTERY I disconnected the battery and the light did not reset On my '95 maxima I have to leave the battery disconnected for ~24 hours to reset the engine lignt. On my 1987 Maxima there is a button to push to reset the light. It is located underneath the passenger kick panel. On my 1999 Maxima I had to disconnect the battery for 24 hours : Go to autozone and have them clear it, easiest way, go to yoru local mechanic, he should have a obd scan tool, pay to have him remove it.
You can disconnect the battery to reset the light, or if you don't want to lose your radio presets, etc... then go to Autozone or similar parts store to have them clear the codes. They generally will do this for free, and can also diagnose what is causing the light to come on.