disconnect the negative battery cable for 10 mins this will reset computer it will do it for sure
Fill your coolant reservoir and the light should turn off. Do it soon or your engine may over heat.
no
How to reset service light on a 2004 grand am
Reset with an OBD2 scan tool, after the repair of whatever triggered the light.
Unhook battery cables (both) for about 5-10 minutes. Then rehook. This may reset the system. If problem persists, then the CEL will come back on.
The check engine light has nothing to do with an oil change. The check engine light is reset with a scan tool after repairing the failure that caused it.
I have a 2006 Pontiac Solstice. I disconnected the battery terminal for about 45 minutes. When I reconnected it the light stayed off. Good luck
after the cause of the code is repaired, you reset with a scan tool, or by unhooking the battery.
You have to unplug the ground from your battery for 1 or 2 minutes.
both lights, the check engine and the low coolant light need to be reset and only a GM dealership can do that because they are the only ones that have the codes
There are pages and pages of things that can cause a check engine light. You need to have it checked with a scantool. Then the code can be diagnosed and repaired.
You can usually disconnect the battery cable for about 15 seconds and reconnect it to reset the engine light. Check the fuse box for a(red) resert button - to reset the engine light disconnect battery for 15 minutes , the red reset button on fuse panel is for motor oil change reminder reset