To reset the change oil light on a Pontiac Solstice, first, turn the ignition key to the "ON" position without starting the engine. Then, press the accelerator pedal three times within five seconds. Finally, turn the ignition off and then back on to check if the light has reset. If it remains illuminated, repeat the process.
To reset the oil change light on a Pontiac Solstice, turn the ignition key to the "On" position without starting the engine. Then, press the gas pedal three times within five seconds. After doing this, the oil change light should reset and turn off. If it doesn’t reset, repeat the process or consult the owner’s manual for further instructions.
To reset the check engine light on a 2007 Pontiac Solstice, you can use an OBD-II scanner to clear the trouble codes that triggered the light. Alternatively, you can disconnect the vehicle's battery for about 15 minutes, which should also reset the light. However, it's important to address the underlying issue that caused the light to illuminate in the first place to prevent it from coming back on. Always consult a professional if you're unsure about any steps.
To reset the computer in a 2008 Pontiac Solstice, you can start by disconnecting the negative battery cable for about 10-15 minutes. This will clear the stored error codes and reset the engine control module. After reconnecting the cable, turn the ignition to the "On" position without starting the engine for a few seconds, then start the car. This process should help reset the computer.
How to reset service light on a 2004 grand am
Reset with an OBD2 scan tool, after the repair of whatever triggered the light.
The check engine light has nothing to do with an oil change. The check engine light is reset with a scan tool after repairing the failure that caused it.
disconnect the negative battery cable for 10 mins this will reset computer it will do it for sure
after the cause of the code is repaired, you reset with a scan tool, or by unhooking the battery.
Fill your coolant reservoir and the light should turn off. Do it soon or your engine may over heat.
There are pages and pages of things that can cause a check engine light. You need to have it checked with a scantool. Then the code can be diagnosed and repaired.
You can usually disconnect the battery cable for about 15 seconds and reconnect it to reset the engine light. Check the fuse box for a(red) resert button - to reset the engine light disconnect battery for 15 minutes , the red reset button on fuse panel is for motor oil change reminder reset