disconnect the negative battery cable for 10 mins this will reset computer it will do it for sure
Fill your coolant reservoir and the light should turn off. Do it soon or your engine may over heat.
To reset the check engine light on a Pontiac Sunfire, you can disconnect the negative battery terminal for about 15 minutes, then reconnect it. Alternatively, using an OBD-II scanner to clear the error codes can also reset the light. Make sure to address any underlying issues that triggered the light before resetting it to avoid recurring problems. Always consult your vehicle's manual for specific instructions related to your model year.
no
How to reset service light on a 2004 grand am
Reset with an OBD2 scan tool, after the repair of whatever triggered the light.
Unhook battery cables (both) for about 5-10 minutes. Then rehook. This may reset the system. If problem persists, then the CEL will come back on.
The check engine light has nothing to do with an oil change. The check engine light is reset with a scan tool after repairing the failure that caused it.
To reset the ETS (Electronic Traction System) light on a 1999 Pontiac Sunfire, you can start by disconnecting the negative battery terminal for about 10-15 minutes. This can sometimes clear the error codes and reset the system. If the light remains on after reconnecting the battery, it may indicate a persistent issue that needs to be diagnosed with an OBD-II scanner. Always check for any underlying problems with the traction system before resetting the light.
I have a 2006 Pontiac Solstice. I disconnected the battery terminal for about 45 minutes. When I reconnected it the light stayed off. Good luck
You have to unplug the ground from your battery for 1 or 2 minutes.
after the cause of the code is repaired, you reset with a scan tool, or by unhooking the battery.
To reset the anti-theft system on a 1995 Pontiac Sunfire, first, insert the key into the ignition and turn it to the "On" position without starting the engine. Leave it in this position for about 10 minutes until the security light turns off. After that, turn the key to the "Off" position for a few seconds, then try starting the vehicle. If the issue persists, you may need to consult the owner's manual or a professional mechanic for further assistance.