This reset procedure works on the X-Type
Service Instruction:
1 . Insert key into ignition barrel.
2 . Press and hold the Reset switch (located on the Trip Computer Switchpack).
3 . NOTE: The reset switch has to be released immediately after the ignition is switched 'ON'. This is critical to enable the rest of the procedure.
Turn the key to Ignition position II and at the point of entering Ignition position II (i.e when a click is heard), instantaneously release the Reset switch.
4 . Wait one second.
5 . Press and hold the Trip switch (located on the end of the left-hand side stalk).
6 . Wait one second.
7 . Press and hold the Reset switch (whilst still holding the Trip switch).
8 . The cluster should display (within three seconds) the warning message 'RESETTING SERVICE MODE'.
9 . Keep both buttons pressed until the warning message changes to 'SERVICE MODE RESET' (after ten seconds).
10 . Once the message is displayed the buttons may be released â€" sequence is now complete.
11 . If a Service Required message was displayed prior to the reset sequence, cycle the ignition to 'Off' and then back to Ignition position II and check that the message is no longer displayed.
jaguar s type twin turbo diesel 2007. how to cancel "service required" indicator.
To reset a Jaguar S service indicator, unplug the positive cable on the battery for about 5 minutes. Then, reconnect the battery. The service light should not stay on when the vehicle is started.
Go to yuotube and type there this question.
Could you display indicator dashboard icons for jaguar x type 2002?
You can reset the engine management light Jaguar X type by checking the original Jaguar manufacturer's or owner's manual and making sure that you the reset option is available.
my jaguar xtype is beeping, and now my brake lights don't work when my headlights are on. Do I need to replace a fuse or reset the rear sensor? Thanks Jasmin-
Indicator is Brit Speak for turn signal. If you are receiving the message on the dashboard display, it will tell you if your what side (left or right) you are having the problem with.
RH = Right Hand Indicator should say front or rear to help narrow it down.
I do not know the radio code for S type 2000 model. Please help
The easiest way to reset the check engine light on a 2003 Jaguar XJ, is to remove the fuse. Keep the fuse out for 10 seconds and then put it back in. If the engine light remains on you should see a mechanic.
The 2003 Jaguar S Type does not have a transmission dipstick. These vehicles were manufactured in a manner that the transmission fluid levels can only be checked by professional service technicians.
I don't see why it wouldn't be.