0
if you have driver information center control on you steering wheel hold down the return (line with arrow) key down until it resets the counter. If you do not have the DIC controls there is another way but not sure what it is dealer can tell you.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
How do you reset your oil life indicator on your 2005 Lincoln town-car?
Hold the mode button until display says someting like Oil life xx% press reset to renew. Hold reset button in until it says oil life 100%
How to Reset 2007 Chevy Avalanche oil life indicator?
2007-2010Turn the ignition to run (one position before starting engine).Display the OIL LIFE REMAINING on the DIC (i) button. If the vehicle does not have DIC buttons, the vehicle must be in P (Park) to access this display.Press and hold the SET/RESET (check mark) button on the DIC, or the trip odometer reset stem if the vehicle does not have DIC buttons for more than 5 seconds. The oil life will change to 100%.Turn the ignition off and then start the engine to verify the indicator has been reset
How do you get rid of the service engine mileage indicator on a 2006 Honda Accord?
Turn key to on position with out starting. Press the select/reset knob until the "engine oil life indicator" is displayed. Hold down the knob for at least 10 seconds. The "engine oil life indicator" will blink. Hold down the select/reset knob for at least 5 seconds. The "engine oil life indicator" will be reset to 100%.
How do you reset service indicator Mercedes ml 270 cdi?
The service indicator light, in your Mercedes ML 270, can be reset by holding in the engine oil life button. The engine oil life will go to 100 percent. The service indicator light should go off.
How do I reset maintenance code for 2007 Honda Odyssey?
A = Change oil1= Rotate tires To reset this turn the ignition switch to the ON position. 2. Press the Select/Reset knob until the engine oil life indicator is displayed. 3. Press the Select/Reset knob for about 10 seconds. The engine oil life indicator and the maintenance item code(s) will blink. 4. Press the Select/Reset knob for more than 5 seconds. The maintenance items code(s) will disappear, and the engine oil life indicator will reset to "100."
How do I reset A1 maintenance code for 2007 Honda Odyssey?
A = Change oil1= Rotate tires To reset this turn the ignition switch to the ON position. 2. Press the Select/Reset knob until the engine oil life indicator is displayed. 3. Press the Select/Reset knob for about 10 seconds. The engine oil life indicator and the maintenance item code(s) will blink. 4. Press the Select/Reset knob for more than 5 seconds. The maintenance items code(s) will disappear, and the engine oil life indicator will reset to "100."
How do you reset the oil life indicator on the 2007 Isuzu ascender?
Turn on the ignition but do not start vehicle. Your engine and oil light will come on. Press on the accelerator three times and hold it down until oil light disappears. You have reset the oil life indicator.
Reset oil life indicator for a 1997 Cadillac DeVille?
press info botton until you come upon "oil life" then press and hold the reset button for about 5 seconds
How do you reset service indicator on Mercedes e200?
The service indicator, on a Mercedes E 200, can be reset by scrolling to the oil life screen. From the screen hold down the scroll button until the percentage goes to 100 percent.
Reset oil 2004 avalanche?
Turn the ignition key to the "on" position but don't start the engine. Rapidly depress the fuel pedal to the floor 3 times in sucession. Turn key off. Start engine normally and "change oil" indicator should flash then go out (this lets you know the oil life monitor has been reset). After driving a few miles the ECU will recalculate oil life. If the "change oil" indacator is still active then repeat process until you see the indicator flash on start up.
How do you reset the oil change indicator on a 2009 Ford Taurus?
Most likely you will have three buttons labeled INFO-SETUP-RESET on the inside of your vehicle. If you press info until you get to the indicator for Oil Life, you should be able to press and hold reset to...reset it. Please refer to your owners manual in future cases
How do you reset the codes in a 2007 Honda Odyssey?
Page 352 of the Owner's Manual, in the section called "Maintenance Minder" it says: 1. Turn the ignition switch to the ON (II) position. 2. Press the Select/Reset knob until the engine oil life indicator is displayed. 3. Press the Select/Reset knob for about 10 seconds. The engine oil life indicator and the maintenance item code(s) will blink. 4. Press the Select/Reset knob for more than 5 seconds. The maintenance items code(s) will disappear, and the engine oil life indicator will reset to "100."
