Turn on the key but don't start the van. Push the accelerator to the floor and release 3 times. It will now reset.
To reset the oil life monitor on a 2004 GMC Envoy, turn the ignition key to the "ON" position without starting the engine. Press the accelerator pedal slowly three times and then turn the ignition off. When you restart the vehicle, the oil life monitor should be reset to 100%. Always consult your owner's manual for any specific instructions related to your vehicle model.
you turn the ignition key just to on and hit the gas pedal 3 times in succession then the oil light should flash 5 times and it will be reset after that...
To reset the oil life monitor in a 2000 BMW Z3, turn the ignition key to the "On" position without starting the engine. Press the gas pedal fully three times within five seconds. After doing this, the oil life monitor should reset to 100%. Finally, turn the ignition off and then back on to confirm that the reset was successful.
buy an american car
How do you manually reset the oil life monitor on a BMW 525i
when you have it on the message that says engine oil life xxx press and hold the clr button and it will reset back to 100%
Change your oil/filter every 5,000 miles if you use conventional oil and every 8,000 miles if you use synthetic and you drive under normal conditions. If your vehicle is equipped with an oil life monitor system then change it when the system tells you too and reset the oil life monitor. If it does not come on for one year change the oil anyway and reset the system even though the light is not on.
To reset the oil life monitor on an Opel Vivaro, first, turn the ignition to the "ON" position without starting the engine. Press the accelerator pedal three times within five seconds. Then, turn off the ignition and restart the vehicle; the oil life monitor should now be reset. Always consult your vehicle's manual for specific instructions related to your model year.
You can reset the service light by bringing of the oil life monitor on your display. Hold the scroll button in until the oil life goes to 100 percent. This should reset your service light.
Turn key but do not start engine, Push the gas pedal all the way to the floor 3 times, Then turn key off and then start engine. If you have a Driver information Center, DIC, then you reset the oil life monitor with the button with the check mark on it when the oil life message is on.
press the oil button then press the reset button hold for five seconds it will reset oil life monitor back to 100%
Mine won't answer either!! help!