To reset the oil life monitor on an Opel Vivaro, first, turn the ignition to the "ON" position without starting the engine. Press the accelerator pedal three times within five seconds. Then, turn off the ignition and restart the vehicle; the oil life monitor should now be reset. Always consult your vehicle's manual for specific instructions related to your model year.
To reset the oil life monitor in a 2000 BMW Z3, turn the ignition key to the "On" position without starting the engine. Press the gas pedal fully three times within five seconds. After doing this, the oil life monitor should reset to 100%. Finally, turn the ignition off and then back on to confirm that the reset was successful.
buy an american car
How do you manually reset the oil life monitor on a BMW 525i
when you have it on the message that says engine oil life xxx press and hold the clr button and it will reset back to 100%
To reset the engine oil life monitor: The procedure must be completed within 10 seconds after switching on ignition. 1. Switch on the ignition, but do not start the engine, 2. depress accelerator pedal fully and hold in this position, 3. depress foot brake three times consecutively, 4. release accelerator pedal, 5. turn off ignition.
You can reset the service light by bringing of the oil life monitor on your display. Hold the scroll button in until the oil life goes to 100 percent. This should reset your service light.
press the oil button then press the reset button hold for five seconds it will reset oil life monitor back to 100%
Turn on the key but don't start the van. Push the accelerator to the floor and release 3 times. It will now reset.
The oil life monitor or the red oil light? Red oil light is bad yellow oil life monitor light means it needs to be reset
You can reset the 2007 Avalon maintenance light by setting the oil life to 100 percent. When the oil life display is on your monitor, hold in the scroll button until it goes to 100 percent.
Turn on the key but don't start the vehicle. Push the accelerator pedal to the floor and release 3 times. It will now reset.
You can reset your engine light by bringing the oil life display onto your monitor. Hold the scroll button in until the oil life goes to 100 percent. The engine light should go off.