If it is like my 2001 Montana you push the odometer button till it comes to the oil percentage , i.e. "OIL 10" or whatever yours reads. You then push in the switch and HOLD it in for several seconds till it resets to 100%. Don't know if this helps or not- good luck.
From the Manual of our 2003 Montana... How to Reset the Change Engine Oil Message
1. With the ingnition key in RUN but the engine off, repeatedly push the trip/reset button until OIL is displayed on the Driver Information Center (DIC).
2. Once OIL is displayed, push and hold the trip/reset button for 5 seconds. The number will disappear and be replaced by 100 (indicating 100% oil life remaining.
3. Turn the key to OFF
The indicator panel should by carefully pried out. Then you can change the bulb.
I am still waiting for the answer u cant reset the abs light u have to take it to the shop, if your abs light is on there is something wrong with your trac system
In order to change the brake light, check your manual for directions. You will need to remove the cover and replace the burnt out bulb.
To replace the brake light on a 2000 Pontiac Montana open the trunk to reveal the housing units. Find the lights and pull the bulbs out. Replace the units.
'How do you change a fog light in a 1996 Pontiac Bonneville? ... How do you
my rear left indicator and alarm light doesnt work, hoe do I change the bulb?.
its behind the driver side head light. take the head light out and u will see the horn.
To change the high beam indicator you have to take the instrument cluster out of the dash.
The brake light fuses can be found in the fuse box. The brake light fuse will be in the second column, fourth from the top.
2 gallons.
Try this http://users.adelphia.net/~bpaskevich/index_files/Radio_Lamp_repair.htm
I have an 01 Pontiac sunfire and I have noticed that the check gages light comes on when the gas is low. I have never seen any other indicator come on for low fuel.