The ASD is a relay controlled by the PCM and does not have a reset.The ASD is a relay controlled by the PCM and does not have a reset.
Unhook the battery for a minute to reset the PCM.
When you change the battery you automatically reset the PCM. Any time you remove the negative battery cable for about 15-20 minutes you will reset the PCM. This will reset your Check engine light also. www.trailvoy.com Trailblazer enthusiasts forum with all the answers for your Trailblazer.
The PCM can be rest on a 1998 Dodge Stratus by connecting an ODBII code reader. It reads all the information stored in the computer and can directly reset the ECM as needed.
Either reset with a scan tool, or by unhooking the battery.
You should be able to reset the PCM by disconnecting the battery for 30 seconds. Make sure you have disabled the anti-theft feature on the stock stereo (if so equipped) before disconecting the battery or you will not be able to use your radio. After the PCM has been reset you will need to drive the vehicle in a variety of conditions in order for the PCM to re-learn the proper information.
Disconnect the negative terminal on the battery for 30 seconds. The PCM will reset.
Clear all PCM codes.
Resetting the PCM, or power train control module, requires access to the engine bay. To reset the control module simply unplug the negative battery cable from the battery for five seconds.
pull the ECM/PCM fuse for a few seonds then replace it. that should reset it
P0601 is PCM internal processor failure.The PCM needs replaced.P0601 is PCM internal processor failure.The PCM needs replaced.
There is no need to do this. Unhooking the battery for a minute will reset the PCM, if that's what you want to do.