Unplug the router for 5 min and then plug it back in.
hold the reset switch in for 10 sec while powering on the device
if u have to reset it , press reset if that doesnt work switch it off and switch it onn again
The router must have a reset button (hold the button pushed for 5 seconds). If not, u can reset the router from management.
The router must have a reset button (hold the button pushed for 5 seconds). If not, u can reset the router from management.
Network+ Guide to Networks answer: Bridge, Switch, Router
Power on the router and press the reset switch for 30 second which is located bottom of the router, after restart the router and it will asked u to give the user name and password for use. By default the user name : Admin & the password : Admin.
There is a little hole on the side if the router labelled 'Reset' when router is switched on, just poke a paperclip or something into this hole and the unit will reset/reboot
What is diffrent between router and switch?
usually there is a small hole at the back of the router which you can press and hold, this will reset your router to factory settings.
A switch cannot function as a router. But you can plug a switch in to one of the ports on the router if you need additional ports.
In order for you to have internet, the router should be connected to a cable modem or another switch or wireless router which already have internet access.
we use straight cable to connect between the router and switch as router and switch are different devices.