You put your seatbelt on.
YOU DONT BUT TO RESET THE LIGHT AFTER REPAIR GO TOWWW.VEHIX411.COM TO SEE FREE VIDEO INSTRUCTIONSI have a 2000 CRV and the airbag deployed which caused the seatbelts to lock. How do you reset them?
Turn power on and set counter to "ODO" Turn power off Turn power on, within 5 seconds, press and hold the trip-reset button After 10 seconds, fasten the seatbelt Release the trip-reset button .. the display should now change to "B-off", turn power off and release the seatbelt.
It is for your safety. More people without a seatbelt die in car accidents than with seatbelt. So I require to use the seatbelt. See here for more information about seatbelt usage: How_much_does_it_cost_to_replace_a_window
why it is ok to not wear a seatbelt
Buckle your seatbelt!
because it's a belt for a seat.
you are wearing the seatbelt.
The seatbelt
By putting your seatbelt on! Not wearing a seatbelt is one of the dumbest things you can do. Seat belts save lives.
Turn off Seatbelt Alarm1. turn the key to the ON position, foot off the brake2. cycle the odometer with the trip reset button until the ODO is displayed (not trip A or B)3. turn the ignition to the LOCK (OFF) position4. unbuckle the driver's seatbelt if it was buckled.5. turn the key to the ON position. when the dash lights have come on, press and hold the trip reset button and count a slow 12 seconds. (editor's note, hold it more like 30 sec)6. while still holding the trip reset button, buckle the driver's side seatbelt.7. the odometer display should read "b ON" or "b OFF". toggle the beep OFF with the trip reset.8. the process should be completed when you unbuckle or turn the key off.
a seatbelt = une ceinture de sécurité