Just got off the phone with my local VW service tech - here are the steps:
1. Put key in ignition (do not turn)
2. Push in trip odometer button.
3. While hold in trip button, turn key to first click.
4. Let go of the trip button and push the minute button.
5. Hands off and turn off key.
6. Start car again - should be reset.
My husband just changed the oil in our 2009 VW Jetta - so I had the same question. Good luck.
Brenda
You don't!
Go get it serviced.
To reset the service light on a 2009 Vauxhall Corsa, turn on the ignition without starting the engine. Press the gas pedal three times within five seconds. Turn off the ignition, then start the engine to check if the service light has reset. If the light remains on, the process may need to be repeated.
To reset the service light on a 2009 Mercedes-Benz ML350, turn the ignition to position "2" (do not start the engine). Press the gas pedal three times within 10 seconds. After that, turn the ignition off, then back on to verify that the service light has been reset. If it remains on, repeat the process.
I had the same issue. This worked for me. "With the doors closed put the key in the ignition. Hold down the trip odometer reset button. Turn the key to the on position. You will see the service indicator light (wrench). Press the minute adjustment button. Release the trip odometer reset button." I tried the same thing on my 2009 Jetta and it worked! (I have over 60,000 miles on it and opted to have the oil change and fuel filter done outside VW) When I left the Service Now still came on. So when I got home I ran a search and found the answer. Thank YOU!
You will need to take the 2006 Audi A6 to a mechanic to have the service light properly reset. In some cases, a person can undo the battery to reset the light.
To reset the oil service light on a 2009 Sprinter van, turn the ignition key to the "ON" position without starting the engine. Press the gas pedal three times within 10 seconds. Then, turn the ignition off and start the engine to check if the oil service light has been reset. If the light remains on, repeat the process.
To reset the service light on a 2009 Ford Transit van, turn the ignition key to the "On" position without starting the engine. Press the accelerator pedal three times within 10 seconds. Then, turn the ignition off and start the engine to check if the service light has reset. If the light remains on, repeat the process or consult your owner's manual for further instructions.
To reset the service light on a 2009 Audi TT, first, turn on the ignition without starting the engine. Then, press the gas pedal fully three times within 10 seconds. After that, turn off the ignition and start the engine to ensure the service light has been reset. If the light remains on, you may need to repeat the process or consult the owner's manual for further instructions.
2009 models can be reset using the centre display panel going to "car-settings" and just scrolling down, it will not alter the long life service, for that you need a scanning tool.
To reset the service light on a 2009 Volvo S80 with a push start, first, turn the ignition to the "On" position without starting the engine. Press the "Trip" button on the instrument cluster until you see the "Service" message, then press and hold the "Trip" button for about 10 seconds until the message disappears. Finally, turn off the ignition and then start the engine to ensure the service light has been reset.
how to reset engine check light on 2009 murano