Press and hold the "clear" button for 10 seconds.
you have to take it to a shop with a computer to reset it they have to go to threw the comptuer in the truck my 93 dodge is the same way. i just live with the light on.
on the SID press customise then select system settings then service info and select reset service info. If the option to reset is not there you will need to change the date to a date beyond the 'Days to service', reset option will then appear. when reset, return date to correct setting. (to change date press and hold the info select button when the date is displayed.
put gas in it
Push and hold the odometer reset button while at the same time turning the ignition switch to the on position. After about 5 seconds the light will reset.
== ==
Yes, the rear pads on a Sabb 93 can be adjusted, but the process typically involves removing the wheel and accessing the brake caliper. Depending on the specific model and brake system, adjustments may be made to the caliper or the brake pads themselves to ensure proper contact with the rotor. Always consult the vehicle's service manual for specific procedures and torque specifications. If you're not experienced with brake maintenance, it's advisable to seek professional assistance.
To reset the engine management light on a Saab 93, you can use an OBD-II scanner to clear the trouble codes that triggered the light. Simply connect the scanner to the vehicle’s diagnostic port, read the codes, and then select the option to clear or reset them. Alternatively, disconnecting the battery for about 10-15 minutes can sometimes reset the light, but this may also reset other electronic systems in the car. Ensure that any underlying issues are addressed before resetting the light to avoid potential problems.
According to the repair manual: Remove the grommet from the speedometer and turn off the lamp by pushing the warning light reset switch, then replace the grommet.
== ==
reset accord 93 computer
3.0 L Sabb V-6 uses a timing belt. This belt must be replaced every 90,000 miles.
Replace the timing belt and reset the light by disconnecting the battery for 15 min.