you have to take it to a shop with a computer to reset it they have to go to threw the comptuer in the truck my 93 Dodge is the same way. i just live with the light on.
You can reset your engine service light by holding in the scroll button. Hold the button in until the engine oil life goes to 100 percent. The engine service light will go off.
Go to the engine oil life display. Hold the display button in until the engine oil life reads 100 percent. Release the button and the service light will go off.
There is no chip it is controlled by the ECU.
There is no reset button for the check engine light. You can have Mitz. do it for $$$ or you can remove the negative battery line for a few seconds and replace. That will reset the check engin light.
It is very easy to reset the check engine light on a VW car. All you have to do is to push the wrench button located near the trip reset. You will hold it in while turning on the ignition. after the service message appears, let go of the wrench button and hold in the minute button. Turn the ignition off and the computer will reset.
The service engine light is the same thing as a check engine light.
On a 2003 Lincoln Navigator : The check engine light / service engine soon light is a drawing of an engine located directly under the center of the tachometer
After service light appears, push reset button located behind steering wheel to the left next to mileage. Press reset button 3 times to select and confirm a service. The control arrows are located on steering wheel to the left.
on mine i just changed the o2 sensor located in the front by fan
The service engine light on your 2000 Ford Explorer by bringing out the oil life indicator screen. On the oil life screen holds the button down until the oil life goes to 100%. This should kick your service engine soon light off.
Turn key to accessory position. Press and hold trip meter reset button. Wait half a second and turn key to on position (not start) continuing to hold trip button. After a few seconds the service light will start flashing. At this point release the trip button, cycle the key and start the engine. The service light should be reset.
The service indicator light, in your Mercedes ML 270, can be reset by holding in the engine oil life button. The engine oil life will go to 100 percent. The service indicator light should go off.