1. Turn the ignition to the "on" position
2. Wait three seconds, then press the gas pedal (very hard) 5 times within 5 seconds
3. Release your foot from the gas peddle for 7 seconds
4. Push the gas pedal down for 10 seconds (SES Light should start to blink)
5. Release the gas pedal for 10 seconds
6. Push the gas pedal again holding it down for 10 more seconds
7. Release the gas pedal and turn the ignition to "off"
8. Start the car, your ECU should now be reset.
= How do you reset the Airbag light on a 2001 Nissan Maxima SE ? =
reset service engine light
How do you reset service light in 2003honda pilot
How do I reset the service engine light on a 2003 Chevy Trailblazer?
How do you reset the oil service warning light manually on a 2003 BMW 525i?
reset service engine light on BMW 325
You need a scan tool to reset light after repairing the code.
How do you reset the security system on a 2003 nissan xterra?
One option to reset is to disconnect the positive (+) battery cale on the battery for 3 minutes. Then reconnect it , this will reboot the computer and the light. SORRY: It doesnt work on the Nissan 2003 350z to do this.
Take it to your dealer!
Check engine light is reset with a scan tool.Oil change due is reset by pressing "step" until "0 miles to service" is displayed. Then press and hold "reset" until it resets.
How do you manually reset the oil life monitor on a BMW 525i
DISCONNECT THE NEGATIVE BATTERY CABLE
The directions to reset the service reminder light are explained in your drivers manual.
There is no reset button for the check engine light. You can have Mitz. do it for $$$ or you can remove the negative battery line for a few seconds and replace. That will reset the check engin light.
Hold the reset button
There are pages and pages of things that can cause a check engine light. You need to have it checked with a scantool. Then the code can be diagnosed and repaired.
It will be in the owners manual. Get one from MOTORLIT.COM
Figure out what tripped the code and fix the problem
Go to your local Auto zone they will read it for free. If there are no faults they will reset it if it has faults they will tell you what to fix.
Auto Zone will read your engine codes FREE... They can also reset the light if you ask. However, until you fix the problem causing the engine light to come on. Even when reset it will eventually come back on.
Some cars it will reset after a certain number of starts. Other wise you will have to take it to a company that can hook your car up to a computer to reset it.
remove the negative battery post leave it off for 5 min replace You cannot reset check engine light the old way. if you do not know don't give misinformation to others. to reset service light with key on open and on left side press and hold red oil reset buttom for 5 seconds.
unhook positive batery cable for 5 mins
Reset light when replacing headlight