1) Procedure to check/reset service status – Distance counter Switch ignition OFF Press and Hold left instrument panel reset button, switch ignition ON to position ‘I’ (accessories) Keep reset button pressed for approximately 5 seconds until the LCD displays ‘RESET SIA’. The distance to service (e.g. 2150 miles) and the service type (e.g. Inspection/oil service) will be displayed. Has the ‘Reset Distance’ limit been reached or exceeded? o NO - Follow instructions in section 2 below o YES - Follow ‘Reset Distance Counter’ instructions below Reset Distance counter procedure Press and hold left instrument reset button for 5 seconds. ‘RESET’ will begin to flash on the LCD display. To reset distance the left hand button should be pressed before the ‘RESET’ message has flashed 5 times The LCD will display ‘END SIA’. Switch ignition off 2) Procedure to check/reset service status – Date counter Press left instrument panel reset button once The LCD will display ‘RESET SIA’ followed by the service due date. Has the ‘Reset Date limit been reached or exceeded? o NO – Press the left instrument button once. The LCD will display ‘END SIA’ to indicate the service interval check/reset procedure has been cancelled. o YES - Follow ‘Reset Date Counter’ instructions below Reset Date counter procedure Press and hold left instrument reset button for 5 seconds. ‘RESET’ will begin to flash on the LCD display. To reset distance the left hand button should be pressed before the ‘RESET’ message has flashed 5 times The LCD will display ‘END SIA’. Switch ignition off
disconnect battery
If the gear box warning light is still coming on after repairing it on a 1998 Landrover Discovery, then the light has to be reset with the computer. Try disconnecting the battery for a few minutes.
Hold the reset button
Hiw do you reset a service light j2
Inside panel passenger side under dash by door.
disconnect the battery with the lights on and then press the horn for 5 seconds. This will erase the codes in the chip. Then reconnect the battery and the service light should be off.
How do you reset service light in 2003honda pilot
reset service engine light
how do u reset service light on 2007 plate bravo
How do you reset 2008 honda element service light?
how do you reset service d light on mercedes gl450
You need JCB service master to reset the service light on loadalls