Want this question answered?
how do you turn off or reset the check fuel cap light on a 1997 Mazda b 2300 2.3 4 cylinder engine.
By taking the cable off battery putting back on reset code
Try taking the battery cable off for 5 minutes it should reset its self.
a resonator restricts the sound in your exhaust. removing the resonator will give it a deeper sound. i would suggest changing the entire exhaust system and leaving he resonator off which would make a louder/meaner sound. leaving it on would silence the idle but when you rev it really high it would still be loud.
Unplug negative cable of battery, wait 30 sec & plug cable wite back, engine light reset ...walah!
in my 2000 b3000 it is under the passenger glove box next to the fuel pressure release valve.
In order to reset a tripped fuel cut off switch you depress the red button located on the top of the switch. To locate the switch depends entirely on the year and make. Most likely its in the trunk area or in the right front kickpanel area.
Simply unscrew the air intake hose from the resonator box. Then look on all 4 sides of the resonator for some bolts. Use a ratchet with an extension to unscrew the bolts, and it pops right off. Did it on my trailblazer to change thee spark plugs (located underneath the resonator box). Hope this helps!
Did you try disconnecting the positive battery terminal for a minute then reconnecting it? Soemtimes this will reset the computer and the light will go out.
If you successfully repaired all the DTC's, the ECM will turn the light off after several ignition/drive cycles and no DTC's have returned.
As soon as the proper amount of coolant is in the system the light should shut off. Be sure to properly purge the cooling system of air. what if light still does not shut off
If you've corrected the tire pressure, it will reset itself. If you had to replace one of the pressure monitors(inside the wheel), you're better off taking it in to the dealer. Some of your larger national chain tire dealers can reset them as well.