This one works on my 2007 Chevy... Don't know if it will work on a 2000.
Put key in ignition and turn to RUN, (Don't Start it)
Press both Brake and Gas pedals (keep them there)
Run the Shifter from Park to 1st (L) and back 5 times
Turn key to off and remove.
Release Gas and Brake
Start the Vehicle.
BCM should be reset.
were is the bcm located on a 2000 monte carlo
Yes aka the Chevy impalaAnswerno Chevy Monte carlos only come in coupes
no monte carlos r2door i have never seen a 2 door impala so no
All 2002 Monte Carlos, with 3.4L or 3.8L, have the 4T65E transmission.
The module is located underneath the coil packs.
2002 Monte carlos are not rear wheel drive
Yes, there is virtually no difference in the dimensions and installation hardware of body parts between 1995-1999 Chevy Monte Carlos.
I sold at a Chevy dealership for a few years, so I can answer with regard to later-vintage Monte Carlos. If I remember right, the rear-seat fold-down option was standard on LTZ and SS Monte Carlos in 2006 and 2007 (LTZ was only available in 2006). It was not available on the more common LS models. The 2000 to 2005 Monte Carlos did not offer this feature. As for earlier models, I can't speak to those. -- Erik Smith
You need to be clear as to what you are asking. There ire numerous parts to an ignition. Are you referring to the switch or module? jd
a shop is costing me 1100.00 to replace little to much i think.
Bolt pattern for most rwd chevys is 5 x 4.75. Camaros, Novas, Monte Carlos and so on.
93-95 Camaros, 91-97 Luminas, 95-97 Monte Carlos, 1997-2004 Ventures