To reset the brake lining light on a 1995 BMW 525i, first ensure that the brake pad wear sensor has been replaced if it was faulty. Next, turn the ignition to the "on" position without starting the engine. Then, press the trip odometer reset button and hold it while turning the ignition off and back on again. Release the button, and the brake lining light should reset.
you have a brake problem and need to have it repaired before you can reset the light sensor you have a brake problem and need to have it repaired before you can reset the light sensor
To reset the brake sensor light on a 1995 BMW 740iL, first ensure that the brake pad wear sensors are functioning properly and have been replaced if necessary. Next, disconnect the negative battery terminal for about 10-15 minutes to reset the car's electrical system. Reconnect the battery, and the brake sensor light should be cleared. If the light remains on, it may indicate a persistent issue that needs further inspection.
It is important to know what the meanings of the emergency lights on a ca. A brake light would stay on in a car because the brake system needed to be fixed, and the light needed to be reset.
Make sure the brake fluid is topped off first as that will set off the light if it's low and if it's full try disconnecting the battery for about a minute to reset the light, if the light comes back on you need to see a mechanic.
Basically fix the problem with the brakes, check to see that the fluid is full and if it is you need to get the complete brake system checked out.
To reset the ABS light on a 1995 Nissan Pathfinder, disconnect the battery for 10 minutes. A Nissan dealer can also reset the light with a computer.
Check the brake fluid.
press reset for tripmeter for a few seconds
To reset the brake proportioning valve on a 1995 Chevy S10, start by locating the valve, typically found near the rear axle. You'll need to bleed the brake system to ensure any trapped air is removed, which can help reset the valve. If the valve has tripped due to uneven brake pressure, gently tap it with a hammer while applying the brakes to help reset it. Finally, check the brake fluid level and ensure there are no leaks before testing the brakes.
hoe do you reset the check engine light in a 1995 land rover
How do you reset the Airbag warning light on a 1995 Toyota Avalon?
why or how do i find the brake light switch on my 1997 nissan 200sx. how do i chane it out.