On the display panel Click the Engine button until it shows oil life remaining, then press and hold the Reset button a few seconds till it switches to 100% oil life remaining. The light will then extintuish
= How do you reset change oil soon light on 1993 buick park avenue? =
Read you owner's manual.
The service engine soon is the same as a check engine light. It has nothing to do with an oil change.
why appear light ( service engine soon), after change oil on a 2001 ford pickup (f150)?
When "CHANGE OIL SOON" light is illuminated, find the hole in the underside of the dash on the passenger side near the door. Insert a blunt instrument into the hole and press the switch. The light will flash four times when the system is reset.
there is no "reset" new pad and sensors is the fix if you have had this done they botched the job
If you open the hood, and open the fuse box cover, there is a red button labeled "oil reset", depress this, that's all there is to it.
If an Explorer engine oil change soon light stays on, the sensor needs replaced. The sensor may also need reset by holding the button down for five seconds.
AnswerTo reset the change oil soon light turn the key to on (not run) and step on the gas to the floor 3 times fast.ACCORDING TO THE 2003 OWNERS MANUAL1. With Key on, (a short time after turning off the engine), press reset button located on drivers side instrument panel fuse block . Button is located at top.2. When the change oil light starts to flash, press and hold the reset button again3. The reset is complete when you hear the chimes and the CHANGE OIL light goes out
reset service engine light on BMW 325
How to reset service light on a 2004 grand am
The light should be reset after each oil change. It is programmed to come on every 7,500 miles. I surely would Not exceed that.