Reset as follows: with the ignition switch in the off position, hold in the hold in the trip odometer. Now turn your key to the on position and you will see a series of zeros or dashes begin to appear. Once that stops, your maintenance light will be reset.
The Check Engine Light has nothing to do with oil changes. It is on because there is a problem with the emissions system.
The check engine light in a 2004 Toyota Tacoma can come on for many reasons. It could indicate an exhaust leak or a problem with the engine.
um yeah it does have one
This could mean any number of things. I have a 98 Tacoma and the "check engine" light has only come on once in 8 years ... and that was because I didn't have a gas cap at the time!
There are pages and pages of things that can cause a check engine light. You need to have it checked with a scantool. Then the code can be diagnosed and repaired.
Have vehicle scanned to determine the problem
The check engine light comes on and stays on when a problem is detected by the self diagnosis system of your vehicle. Generally, a check engine light is lit when there is a problem in the emissions or somthing that is affecting the effectiveness of the emissions. If the check engine light is flashing a misfire has been detected
The check engine light has nothing to due with an oil change.
The check engine light does not come on for an oil change.
After the repair, you reset it with an OBD2 scan tool.
If you turn on the ignition without starting the engine and the Check Engine light does not come on, the bulb has burnt our or has been removed. Replace the bulb.
The check engine light has nothing to do with an oil change. The check engine light is reset with a scan tool after repairing the failure that caused it.