Want this question answered?
You can not disconnect the check engine light.
The Chrysler Cirrus did not come out until 1995. You reset the check engine light with a scan tool or by unhooking the battery. If you have not repaired the cause of the code the light will come back on.
With a scan tool.
A flashing check engine light is an indication of a severe engine misfire.
The bulb is burnt out or has been removed.
You need a code reader to reset & plug into port.
Could be just about anything without more information. Check your oil level first.
go to an auto parts store most will put on computer for you for free
My Cirrus wouldn't start with no check engine light either and it was not the battery because the radio, lights, power windows work. After taking to my mechanic he began checking the electrical system and found that the sparks plugs were not getting any power because the distributor was bad.
THE CHECK ENGINE LIGHT IS ON FOR MANY REASONS, THE BEST THING THAT YOU CAN DO IS GO TO A PERCISION TUNE IN YOUR AREA TO HAVE THE PROBLEM FIXED.THERE ARE ABOUT 5 DIFFERENT THINGS IT COULD BE, POSSIBLY THE OXIGEN SENSOR IS BAD.THAT IS USUALY THE PROBLEM.
On my 98 Cirrus, replaced the fuel cap and then disconnected the battery for 10 minutes and the check engine light turned off. My wifes Lexus had a similar problem. Sometimes a different brand of Gas will do the trick too. ^ I tried this today and it worked! Thanks so much =)
With a scan tool.