0
To clear the change engine oil light, press the gas station symbol on the steering wheel until the engine oil % appears on the dash. Next press and hold the arrow on the steering wheel. Engine oil life should now read 100%.
Wiki User
∙ 14y ago
Wiki User
∙ 14y agoFirst ensure O2 sensor is working properly, replace if wires look
melted. Then, turn ignition to acc. disconect Battery. Turn off ignition
re connect battery & eng light will be off
Wiki User
∙ 14y ago2004 Chevrolet Suburban
1. Turn the ignition key to RUN with the engine off.
2. Fully press and release the accelerator pedal slowly three times within five seconds. If the OIL LIFE RESET message flashes for 10 seconds, the system is resetting.
3. Turn the key to LOCK.
Wiki User
∙ 15y agoTurn key on do not start, Push gas pedal all the way to the floor 3 times being sure to let all the way off each time, Turn key off then start engine.
If it don't work the first time repeat steps again.
Wiki User
∙ 14y agotry disconnecting the battery that resets your computer
Wiki User
∙ 13y agoturn the key to the run position then press the gas pedal fully 3 times you oil life should reset
Add your answer:
Earn +20 pts
How do you reset a check engine light in my 2004 Chevy suburban?
That requires an engine scanner to do that. If you don't repaire what made the light come on in the first place it will just come back on.
How do you reset service engine soon light in a pontiac 2004 grand am se?
How to reset service light on a 2004 grand am
How do you reset check engine light on 2004 Cadillac CTS?
You have to reset it with a OBC scanner :-)
What size engine does the 2004 Chevrolet Suburban have?
The 2004 Chevrolet Suburban has a V8 engine.
Reset 2004 Honda accord check engine light?
You can reset the 2004 Honda Accord check engine light by removing the instrument light fuse. The location of the fuse can be found on the inside cover of the fuse box.
How do you reset check engine light in Nissan Pathfinder 2004?
Repair the problem then use an OBD2 scan tool to reset the light.
How do you reset the service engine soon light on a 2004 gmc envoy?
To reset the service engine soon light on a 2004 GMC Envoy you can remove the ECU fuse. ECU stands for electronic control unit.
Reset check engine light 2004 Jeep Grand Cherokee?
Disconnect the negative battery cable for about two minutes and that should reset your check engine light.
Your gas cap was found loose and now you have a check engine light on How do you reset a check engine light on a 2004 Toyota Rav 4?
Reset the Check Engine Light by disconnecting the battery for about 10 minutes.
How do you reset the check engine light after an oil change on a 2004 Pontiac Vibe?
The check engine light has nothing to do with an oil change. The check engine light is reset with a scan tool after repairing the failure that caused it.
How do you Reset check engine light 2004 vw golf?
With a scan tool.
How do you reset check engine light on 2004 Hyundai Getz?
P 0172
