Want this question answered?
1995 Buick LeSabre how do i reset my radio
Buick does not use a reset switch.
You would need to disconnect the battery for at least 5 minutes. This should reset the computer system back to manufacturer settings.
Take the negative battery cable off, then turn the ignition to the on position to leave the ignition on for 5 seconds then turn off. Then reconnect your negative battery cable.
the older cars u can unhook the battery for 15 minutes but with the new computers in the cars today u have to unhook them for 30 to 45 minutes then it will reset the computer
The fuel shut off reset button is located inside the 1998 Buick LeSabre. It can be found on the firewall in the front passenger side.
I worked on an 89 and what I did was unhook the negative connection to the battery and leave it off for 15 minutes. The reconnect it. You will need to fix the time and radio channels but normally the computer is reset
Hold reset button for about 5 seconds then it should reset.
If you are referring to resetting the Check Engine Light then you will need to have someone with a scanner to do it. If you are referring to reprogramming the Engine Control Module then the dealer will do it.
no. you might have to reset the clock and radio.
Did you try disconnecting the battery for five minutes? Most OBD II code readers have a reset or erase feature that will erase the codes and reset the computer after diagnostics are complete.
vehicle will not start how do I reset the computer you don't need to