I found the following on Auto Zones website - you can register for free access to repair guides .
GM Bonneville/Eighty Eight/LeSabre 1986-1999
Clearing CodesStored fault codes may be erased from memory at any time by using a suitable scan tool, or removing power from the ECM for at least 30 seconds. It may be necessary to clear stored codes during diagnosis to check for any recurrence during a test drive, but the stored codes must be written down when retrieved. The codes may still be required for subsequent troubleshooting. Whenever a repair is complete, the stored codes must be erased and the vehicle test driven to confirm correct operation and repair.
When using a scan tool to clear the codes, make sure to follow all of the instructions provided by the manufacturer.
Depending on the electrical distribution of the particular vehicle, power to the ECM may be disconnected by removing the ECM fuse in the fuse box, disconnecting the in-line fuse holder near the positive battery terminal or disconnecting the ECM power lead at the battery terminal. Disconnecting the negative battery cable to clear codes is not recommended as this will also clear other memory data in the vehicle such as radio presets.
Where does the camsensor go on a 1997 buick lesabre
how do you replace the fuel pump on a 1997 buick lesabre
The P0336 fault code on 1997 Buick Lesabre is a fault in the crankshaft position sensor circuit.
probably. go for it.
The 1997 Buick LeSabre is a mid-sized four door sedan. The vehicle retails for about 1000 dollars to about 6000 dollars depending on condition.
1997, 98 and 99 lesabres are supposed to bigger inside so check with a dealer or wrecking yard.
118 ft lbs 1997-2004 Buick LeSabre
4
5.25"
4.48
18 gallons.
Buy a ford